導致丁基防水嵌縫膠性能發生變化的關鍵因素
2025-04-29
推薦新聞
配比對單組分聚氨酯密封膠低溫表干時間及固...
2025-04-29
催化劑的不同量搭配對硅烷改性聚氨酯密封膠...
2025-04-29
除水劑對改性硅烷聚醚丁基防水嵌縫膠的性能...
2025-04-28
固化劑添加量對硅烷改性聚氨酯密封膠剪切強...
2025-04-28
后熟化時間及溫度對丁基防水嵌縫膠性能的影響
- 發布時間 : 2025-4-14 16:44:24
- Views:
(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.
后熟化時間及溫度對丁基防水嵌縫膠性能的影響
(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.
- 發布時間 : 2025-4-14 16:44:24
- Views:
Information
丁基防水嵌縫膠成型后，還要在代定條件下熟化，使擴鏈反應繼續進行，以達到軟段相和硬段相規整排列，形成結晶。在一定后熟化溫度下均存在最佳后熟化時問，該點膠塊拉伸強度和伸長率同時達到最大，且丁基防水嵌縫膠的性能較穩定。
可看出，后熟化時間對聚氨醋有較大影響。隨著后熟化時間的延長，硬度和拉伸強度一直增加，而斷裂伸長率則先增加后減小。當后熟化時間)lOh，硬度、伸長率和拉伸強度基本不再變化。這是因為聚氨醋在初步硬化后，大分子鏈還未完全生成，體系內仍然存在著游離的異氰酸醋基團;隨著后熟化時間延長，擴鏈反應完全，其力學性能也趨于穩定。當后熟化時間過短，微相分離不完全;后熟化時間過長，容易產生較多腮基，影響其力學性能。
可看出，后熟化溫度在80-140 ℃，其硬度、斷裂伸長率及拉伸強度隨溫度的升高而增大。可認為，聚氨醋在后熟化階段軟硬段的活動與溫度有關，溫度越高，活動性越強，達到規整排列時間越短，達到最佳穩定力學性能時間也越短;但熟化溫度太高，容易產生縮二腮基團，導致拉伸強度、斷裂伸長率等力學性能變低。若后熟化溫度太低，微相分離不完全，力學性能達不到最佳穩定狀態。一般后熟化溫度為120140℃，時間為4-lOh。http://ago-games.com/
Scan the QR code to read on your phone
上一篇: 不同R值對MS密封膠性能的影響
上一篇: 不同R值對MS密封膠性能的影響
+86-
13573398725
sdyuantai@163.com
搜索